                   PSU2 by Harry Lythall, SM0VPO

PCB foil pattern for 0-15v 0-1A PSU as described on my homepage as
listed below. The terminals marked "meter+" and "meter-" are for a
current meter to be added to the PSU. The voltage here is 0-500mV,
which corresponds to 0-1 ampere, or whatever the maximum output is
that you have chosen. The PCB is 65mm x 95mm. Do NOT scale down as
this will destroy the resolution. If you have PSP then use PRINTER
SETUP and select 39% for the picture size.  If you should have any
questions about this project then send me e-mail to:

                anothersillyquestion@sm0vpo.8m.com

This design may NOT be copied, duplicated nor published without my
express permission. Furthermore this design may NOT be used in any
way for gain or profit. Over -90%- of the projects on my homepages
have been published in magazines and are therefore subject to laws
of copyright. For more information see my homepages.

http://sm0vpo.8m.com                          (main site)
http://hem2.passagen.se/sm0vpo                (Mirror in Europe)
http://members.xoom.com/sm0vpo                (Mirrir in Far East)
http://www.geocities.com/SiliconValley/3569   (Mirror in USA)

Have fun from Harry lythall, SM0VPO
